Commit Graph

1211 Commits (master)

Author SHA1 Message Date
Manuel Tobias Schiller 740ada1447 make the various combinations of arrow keys and shift/control/meta work
When using st with screen, I've bound next, prev, new screen to
combinations like Ctrl-Alt-Right,Left,Down; xterm and (u)rxvt work fine
when this combination of modifiers is pressed, st does not seem to
transport all of them; a single modifier key is fine (e.g. Ctrl-Up,
Alt-Down etc., but combinations are not). While I'm not terribly
familiar with this, I have tried to hack config.h in a more or less
systematic way to generate the expected sequences.
2016-11-14 19:58:02 +01:00
ian@remmler.org 424202798b Initial font size issue.
Hi,

When I specify a font by point size (I'm using "Inconsolata:size=12"),
characters that are substituted from another font because they are not in the
main one appear too small.  Doing a zoom reset fixes it.  For example:

Before: http://i.imgur.com/G4Mfv4X.png
After:  http://i.imgur.com/PMDhfQA.png

I found that adding the pixel size (acquired from the initial font load) to the
pattern then reloading the font fixes the problem.  I'm not sure if this is a
proper fix, though.
2016-11-14 19:27:55 +01:00
pl@ninthfloor.org 3ca7249c86 tic -s -> tic -sx (Treat unknown capabilities as user-defined.) 2016-11-14 19:05:47 +01:00
pl@ninthfloor.org 06f8cf8ca8 Add tmux capabilities to st.info 2016-11-14 19:05:11 +01:00
pl@ninthfloor.org 902a392b90 Make strdump(), csidump(), print to stderr
The two functions strdump(), csidump() are called to show errors and
their output is introduced by a message printed to stderr. Thus, it it
more consistent to have them print to stderr.

Moreover stderr is unbuffered (at least on Linux), making problems
immediately visible.
2016-11-14 18:36:38 +01:00
Quentin Rameau 8c99915608 Do not use color when font attributes are supported
If fontconfig gives us a font without the attributes we asked for,
display an alternative color instead.
2016-10-23 17:56:46 +02:00
Quentin Rameau 7854fde1ff st.1: add an entry for ISO-14755 shortcut 2016-10-22 10:43:18 +02:00
Quentin Rameau 68bae9c7b1 Add support for iso14755
We launch dmenu for getting a codepoint, then convert it and send it to
the terminal.
2016-10-18 13:32:36 +02:00
Klemens Nanni 331033f1f6 Add missing device path to '-l' example
Also, it's ttyS0 not ttySO.
2016-10-13 17:25:17 +02:00
Roberto E. Vargas Caballero f7398434b8 Add parsing of DCS q sequences
These sequences are used to operate with sixels, but they are still
str sequences, so they are finished with \a, ST or with a C1 control
code. This patch also disables utf8 handling for the case of sixels.
2016-09-14 08:27:32 +02:00
Roberto E. Vargas Caballero f0e2d28732 Add support for enabling/disabling utf
There are some ocasions where we want to disable the enconding/decoding of utf8, mainly
because it adds an important overhead. This is partial patch for ESC % G and ESC % @,
where they modified the way that st reads and write from/to the serial line, but it does
not modifies how it interacts with the X window part.
2016-09-13 14:01:18 +02:00
Roberto E. Vargas Caballero 078337d745 Delete ncv capability from terminfo
We do not need to disable the previous ncv definition, because
there is not previous definition.
2016-09-09 13:11:06 +02:00
Quentin Rameau 5ce853a1c1 st.info: do not prevent st from displaying attributes
With ncv set to 3, we prevent st from displaying A_STANDOUT and
A_UNDERLINE with colors while our virtual terminal is capable of it.
2016-09-09 11:05:11 +02:00
Christoph Lohmann 023225ef40 Update the LICENSE.
This is for the next release.
2016-08-11 16:30:29 +02:00
Christoph Lohmann 6e79e8357e 0.7 release 2016-08-11 16:25:58 +02:00
Christoph Lohmann 308bfbf6be Change who's expanding tabs. 2016-07-20 13:56:15 +02:00
Christoph Lohmann c4f245eccd Add some hint to have the pseudo terminal in the right mode.
If you don't make sure that the terminal does not expand tabs to spaces, of
course such a setting won't work.
2016-07-20 13:52:31 +02:00
Christoph Lohmann 2251f6465a Add comment about tabspaces.
st.info needs to be changed too, when tabspaces are changed.
2016-07-20 13:00:43 +02:00
Alive 4ever 235b438e68 Consistent Alt+BackSpace behavior
The default config specifies BackSpace as "\177". The default behavior
should persist across modifier keys, commonly Mod1 (Alt or Meta) which
is widely used to delete a word on readline and text editors, notably
Emacs.

This will make Alt+BackSpace behaves as expected, i.e. sends "\033\177"
instead of "\033\010" as previous default behavior.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-07-12 15:25:08 +02:00
Christoph Lohmann 528241aa38 Use XftFontMatch in place of FcFontMatch.
git am -s didn't like your patch:

From: Mark Edgar <medgar123@gmail.com>

XftFontMatch calls XftDefaultSubstitute which configures various match
properties according to the user's configured Xft defaults (xrdb) as well as
according to the current display and screen. Most importantly, the screen DPI
is computed [1]. Without this, st uses a "default" DPI of 75 [2].

[1]: https://cgit.freedesktop.org/xorg/lib/libXft/tree/src/xftdpy.c?id=libXft-2.3.2#n535
[2]: https://cgit.freedesktop.org/fontconfig/tree/src/fcdefault.c?id=2.11.1#n255
2016-06-03 15:02:32 +02:00
v4hn 60aeb37edb delete clipboard properties after pasting them
https://tronche.com/gui/x/icccm/sec-2.html#s-2.4 specifies:
> Once all the data in the selection has been retrieved,
> the requestor should delete the property in the SelectionNotify request

Most Clipboard-Owners ignore whether or not the property is already set,
so this is mostly a cosmetic change to keep the windows property list clean.

However, at least synergy decides to wait for the requestor to delete
the properties if they are already set by a previous paste (from synergy).

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-06-03 14:55:25 +02:00
Roberto E. Vargas Caballero 66556d9670 Remove stupid assignation in memcpy() 2016-04-15 07:58:26 +02:00
Tor Andersson 39964614b7 st: Fix off-by-one error when calculating character width.
LEN(str) is one larger than strlen(str) because it also counts the zero
terminator. The original code would include the .notdef glyph (since it'll
try to encode character 0, which gets encoded to the .notdef glyph) when
measuring the average dimensions of printable ascii characters.

This causes problems with fonts like GNU Unifont where the .notdef glyph is
not the same width as the usual half-width characters.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-03-09 22:01:25 +01:00
Ton van den Heuvel 0e48a1995e Fix vertical character alignment in some cases
The y-position of a character found by asking fontconfig for a matching
font does not take the border pixels into account, resulting in a
slightly misaligned vertical position.

Signed-off-by: Ton van den Heuvel <tonvandenheuvel@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-03-08 15:43:52 +01:00
Christoph Lohmann 6d8f85232e I like empty lines. 2016-03-08 13:55:22 +01:00
Ryusei Yamaguchi 034a5c8a09 Measure the single advance width with a heuristic method
This fix is needed to use dual-width fonts, which have double-width
glyphs (e.g. CJK unified ideographs).

Signed-off-by: Ryusei Yamaguchi <mandel59@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-03-08 13:46:42 +01:00
Christoph Lohmann 30440295bc xtermclear() is now done by xdrawglyphfontspecs()
Thanks Ton van den Heuvel for the proposal!
2016-03-07 14:33:05 +01:00
Lucas Gabriel Vuotto 4fdba860c8 arg.h: fixed argv checks order
This prevents accessing to a potentially out-of-bounds memory section.

Signed-off-by: Lucas Gabriel Vuotto <l.vuotto92@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-02-21 17:21:41 +01:00
Quentin Rameau 6d636beb22 Fix forgotten bracket and duplicate option in usage()
Scratch the preceding patch, this one is more correct
(don't forget to 'git am --scissors' ;))
-- >8 --

Also reformat the strings in a saner layout

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-02-01 18:14:27 +01:00
Quentin Rameau 6e70bb97d4 Extract ttyresize() out of cresize()
This way we can call cresize() to set the terminal size before creating
a tty or spawning a process, which will start with the correct size.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-01-30 18:40:13 +01:00
Christoph Lohmann 82335583eb Ok, no need for a separate version function.
This is just redundant metadata. Please add Java comment meta classes too.
2016-01-30 09:50:18 +01:00
Quentin Rameau 0cd5117a2c Add -n option for setting WM_CLASS instance name
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-01-30 09:45:23 +01:00
Quentin Rameau bd5fdbe64c Reformat usage and separate version from it
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2016-01-30 09:44:41 +01:00
Christoph Lohmann 504a165277 Enforce a terminal size to reduce race conditions in too efficient apps.
dvtm is too fast in starting up. It will then have a race condition in finding
the right. terminal size.
2016-01-28 18:09:11 +01:00
Christoph Lohmann 9031e228ce Height is height. 2016-01-14 23:19:03 +01:00
Christoph Lohmann 610723a58f Bump year. 2016-01-01 14:18:43 +01:00
Christoph Lohmann ff241199ed Fixing the XClassHint setting in st. 2015-12-20 01:43:32 +01:00
Roberto E. Vargas Caballero 375b28720f Avoid recursive call to ttywrite from ttyread
Ttyread() calls to ttywrite, so if we check for reading before
that for writing in ttywrite we can get a circular call sequence.
2015-11-21 18:21:03 +01:00
Quentin Rameau d836561b96 arg.h: remove unused macros
ARGUM isn't used and ARGNUMF uses estrtol() that isn't defined anywhere.
Those were probably copied from sbase arg.h.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-11-08 20:33:56 +01:00
Christoph Lohmann 00873e65ee Introduce lim in all ttywrite() checks. 2015-11-06 20:46:23 +01:00
Roberto E. Vargas Caballero 9f6d8845df Fix ttywrite()
ttywrite was assuming that if it could not write then it could
read, but this is not necessarily true, there are some situations
where you cannot read or write. The correct behaviour is to detect
if you can read or/and write.
2015-11-06 20:01:00 +01:00
Ivan Tham f0398db4d1 Now the mshortcuts are even more consistent.
Keep everyone happy

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-11-01 08:23:26 +01:00
Christoph Lohmann e2aa03e6b7 Now the Shortcuts are more consistent.
Keep the debile happy.
2015-10-31 09:29:04 +01:00
Jason Woofenden f56c58a968 fix bug where first selection snaps to lines 2015-10-11 11:44:34 +02:00
Quentin Rameau 293f573efd Fix the cursor colors selection
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-10-06 17:36:02 +02:00
Christoph Lohmann 2ea02c937e Normalize the whole color selection in xdrawcursor. 2015-10-06 00:21:44 +02:00
Quentin Rameau 80fe97f8a6 Fix the cursor color when over selection.
If we want to show a custom selected cursor color, we must not set the
revert attribute to the drawn glyph.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-10-06 00:05:04 +02:00
Christoph Lohmann a2a60f0a2c Make the cursor shapes more descriptive.
»IBeam« is now »Bar« because it's named like that in the source code.
2015-10-05 23:05:38 +02:00
Christoph Lohmann 52d0e82df7 Snowman is everywhere. 2015-10-05 22:59:04 +02:00
Christoph Lohmann 78b04865fb Style normalisation in the config.def.h.
This adds an awareness commit for the big key array too.
2015-10-05 22:54:44 +02:00