Commit Graph

77 Commits (fa253f077f19b3220c7655b81bd91e52f4367803)

Author SHA1 Message Date
Steve Ward dec6b530a4 Call xsetcursor to set win.cursor in main
In xsetcursor, remove "DEFAULT(cursor, 1)" because 0 is a valid value.
Increase max allowed value of cursor from 6 to 7 (st extension).
2020-05-24 13:45:42 +02:00
Hiltjo Posthuma 914fb825df code-style: add fallthrough comment
Patch by Steve Ward, thanks.
2020-05-09 14:43:31 +02:00
Hiltjo Posthuma 87545c612e tiny code-style and typo-fix in comment 2020-05-09 14:05:04 +02:00
Avi Halachmi (:avih) 1d59091065 auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended
output. This commit eliminates most of the tear/flicker.

Before this commit, the display timing had two "modes":

- Interactively, st was waiting fixed `1000/xfps` ms after forwarding
  the kb/mouse event to the application and before drawing.

- Unattended, and specifically with animations, the draw frequency was
  throttled to `actionfps`. Animation at a higher rate would throttle
  and likely tear, and at lower rates it was tearing big frames
  (specifically, when one `read` didn't get a full "frame").

The interactive behavior was decent, but it was impossible to get good
unattended-draw behavior even with carefully chosen configuration.

This commit changes the behavior such that it draws on idle instead of
using fixed latency/frequency. This means that it tries to draw only
when it's very likely that the application has completed its output
(or after some duration without idle), so it mostly succeeds to avoid
tear, flicker, and partial drawing.

The config values minlatency/maxlatency replace xfps/actionfps and
define the range which the algorithm is allowed to wait from the
initial draw-trigger until the actual draw. The range enables the
flexibility to choose when to draw - when least likely to flicker.

It also unifies the interactive and unattended behavior and config
values, which makes the code simpler as well - without sacrificing
latency during interactive use, because typically interactively idle
arrives very quickly, so the wait is typically minlatency.

While it only slighly improves interactive behavior, for animations
and other unattended-drawing it improves greatly, as it effectively
adapts to any [animation] output rate without tearing, throttling,
redundant drawing, or unnecessary delays (sounds impossible, but it
works).
2020-05-09 13:53:50 +02:00
Hiltjo Posthuma 5703aa0390 make argv0 not static, fixes a warning with tcc
Reported by Aajonus, thanks!
2020-04-10 12:12:43 +02:00
Avi Halachmi (:avih) 28ad288399 mouseshortcuts: fix custom modifier on release
This line didn't work at mshortcuts at config.h:

  /*  mask       button   function  arg       release */
    { ShiftMask, Button2, selpaste, {.i = 0}, 1 },

and now it does work.

The issue was that XButtonEvent.state is "the logical state ... just prior
to the event", which means that on release the state has the Button2Mask
bit set because button2 was down just before it was released.

The issue didn't manifest with the default shift + middle-click on release
(to override mouse mode) because its specified modifier is XK_ANY_MOD, at
which case match(...) ignores any specific bits and simply returns true.

The issue also doesn't manifest on press, because prior to the event
Button<N> was not down and its mask bit is not set.

Fix by filtering out the mask of the button which we're currently matching.

We could have said "well, that's how button events behave, you should
use ShiftMask|Button2Mask for release", but this both not obvious to
figure out, and specifically here always filtering does not prevent
configuring any useful modifiers combination. So it's a win-win.
2020-04-02 14:41:03 +02:00
Ivan Tham 51e19ea11d Remove explicit XNFocusWindow
XCreateIC ICValues default XNFocusWindow to XNClientWindow if not
specified, it can be omitted since it is the same.

From the documentation
https://www.x.org/releases/current/doc/libX11/libX11/libX11.html

> Focus Window
>
> The XNFocusWindow argument specifies the focus window. The primary
> purpose of the XNFocusWindow is to identify the window that will receive
> the key event when input is composed.
>
> When this XIC value is left unspecified, the input method will use the
> client window as the default focus window.
2020-02-19 00:46:20 +01:00
Quentin Rameau 26cdfebf31 x: fix XIM handling
Do not try to set specific IM method, let the user specify it with
XMODIFIERS.

If the requested method is not available or opening fails, fallback to
the default input handler and register a handler on the new IM server
availability signal.

Do the same when the input server is closed and (re)started.
2020-02-02 22:56:51 +01:00
Quentin Rameau cd785755f2 x: check we still have an XIC context before accessing it 2020-02-02 22:56:51 +01:00
Quentin Rameau 2cb539142b x: do not instantiate a new nested list on each cursor move 2020-02-02 22:56:51 +01:00
Quentin Rameau 99de333951 x: move IME variables into XWindow ime embedded struct 2020-02-02 22:56:51 +01:00
Ivan Tham 895e5b50a8 Increase XmbLookupString buffer
Current buffer is too short to input medium to long sentences from IME.
Input with longer text will show the wrong input, taking 64 instead of
32 bytes should be enough for most of the cases. Broken cases before,

Chinese (taken from song 也可以)
可不可以轻轻的松开自己

Japanese (taken from bootleggers rom quote)
あなたは家のように感じる
2020-01-18 14:21:50 +01:00
Ingo Lohmar 1f09f0b0bb apply hints before initial mapping (ICCCM)
For WM_CLASS this is mentioned in the ICCCM docs
https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.2.5
(third sentence).

When changing the WM_CLASS from the command line, this is necessary for
window managers to pick it up before applying class-based rules.
2019-10-26 11:47:24 +02:00
Avi Halachmi (:avih) a2c479c4c8 mouse shortcuts: allow using forcemousemod (e.g. shift)
The recent mouse shurtcuts commits allow customization, but ignore
forcemousemod mask (default: shift) as a modifier, for no good reason
other than following the behavior of the KB shortcuts.

Allow using forcemousemod too, which now can be used to invoke
different shortcuts, though the automatic effect of forcemousemod will
be lost for buttons which use mask with forcemousemod.

E.g. the default is:

static uint forcemousemod = ShiftMask;
...
{ XK_ANY_MOD,           Button4, ttysend,        {.s = "\031"} },
...

where ttysend will be invoked for button4 with any mod when not in mouse
mode, and with shift when in mouse mode.

Now it's possible to do this:
{ ShiftMask,            Button4, ttysend,        {.s = "foo"} },
{ XK_ANY_MOD,           Button4, ttysend,        {.s = "\031"} },

Which will invoke ttysend("foo") while shift is held and ttysend("\031")
otherwise. Shift still overrides mouse mode, but will now send "foo".

Previously with this setup the second binding was always invoked
because the forceousemod mask was always removed from the event.

Buttons which don't use forcemousemod behave the same as before.

This is useful e.g. for the scrollback mouse patch, which wants to
configure shift+wheel for scrollback, while keeping the normal behavior
without shift.
2019-10-24 15:34:25 +02:00
Avi Halachmi (:avih) d2b75db8d7 mouse shortcuts: don't hardcode selpaste
Because selpaste is activated on release, a release flag was added to
mouse shortcuts which controls whether activation is on press/release,
and selpaste binding to button2 was moved to config.h .

button1 remains the only hardcoded mouse button - for selection + copy.
2019-10-13 21:46:31 +02:00
Avi Halachmi (:avih) b6d280de6d mouse shortcuts: allow override for all shortcuts
Allow forceselmod to override all mouse shortcuts rather than only
selection, and rename it to forcemousemod as it's now more appropriate.

This will affect mouse shortcuts which use mask other than XK_ANY_MOD.

This does not affect the default behavior because the default mouse
shortcuts (wheel) use XK_ANY_MOD, where forceselmod already activated
the override also before this change.

Previously, if a mouse shortcut was configured with a specific mod and
forceselmod was held, then the shortcut did not execute unless the
configured mod included forceselmod.
2019-10-13 21:46:31 +02:00
Avi Halachmi (:avih) ba7f4d69af mouse shortcuts: allow same functions as kb shortcuts
Previously mouse shortcuts supported only ttywrite.

This required adding an "Arg" function ttysend - which does what the
original mouse shortcuts did.
2019-10-13 21:46:31 +02:00
Hiltjo Posthuma ed68fe7dce simplify (greedy) font caching allocating a bit
POSIX says:
"If ptr is a null pointer, realloc() shall be equivalent to malloc() for the
 specified size."
2019-03-03 11:29:43 +01:00
Hiltjo Posthuma 4e0135afec style: remove double empty newlines 2019-03-03 11:23:54 +01:00
magras a8cb8e9454 fix use after free in font caching algorithm
Current font caching algorithm contains a use after free error. A font
removed from `frc` might be still listed in `wx.specbuf`. It will lead
to a crash inside `XftDrawGlyphFontSpec()`.

Steps to reproduce:
$ st -f 'Misc Tamsyn:scalable=false'
$ curl https://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-demo.txt

Of course, result depends on fonts installed on a system and fontconfig.
In my case, I'm getting consistent segfaults with different fonts.

I replaced a fixed array with a simple unbounded buffer with a constant
growth rate. Cache starts with a capacity of 0, gets increments by 16,
and never shrinks. On my machine after `cat UTF-8-demo.txt` buffer
reaches a capacity of 192. During casual use capacity stays at 0.
2019-03-03 11:18:31 +01:00
Ivan Tham e85b6b6466 better Input Method Editor (IME) support
Features:

- Allow input methods swap with hotkey (E.g. left ctrl + left shift).
- Over-the-spot pre-editing style, pre-edit data placed over insertion point.
- Restart IME without segmentation fault.

TODO:

- Automatically pickup IME if st started before IME
2019-02-12 18:45:15 +01:00
Hiltjo Posthuma d7bf023b2f fix memory leak in xloadcols()
reported by Avi Halachmi (:avih)" <avihpit@yahoo.com>

patch slightly changed by me.
2018-11-04 14:35:07 +01:00
Hiltjo Posthuma 4f4bccd162 Revert "Simplify cursor color handling"
This reverts commit 1911c9274d.
2018-07-17 20:01:58 +02:00
Hiltjo Posthuma 8ed7a4b3b7 Revert "Make cursor follow text color"
This reverts commit b51bcd5553.
2018-07-17 20:01:57 +02:00
Hiltjo Posthuma 732be223ee Revert "Fix crash when cursor color is truecolor"
This reverts commit 5535c1f04c.
2018-07-17 20:01:54 +02:00
Jules Maselbas 5535c1f04c Fix crash when cursor color is truecolor
Reported-by: Ivan Tham <pickfire@riseup.net>
2018-07-15 18:16:52 +02:00
Jules Maselbas b51bcd5553 Make cursor follow text color 2018-07-14 12:49:37 +02:00
Jules Maselbas 1911c9274d Simplify cursor color handling 2018-07-14 12:49:35 +02:00
Jules Maselbas 29f341da7c Fix crash on resize
Prevent to realloc xw.specbuc with a negative number of col.
Add proper hints for the minimal size, for one character.
2018-06-30 20:51:46 +02:00
Hiltjo Posthuma 041912a791 error message style and use strerror in a few places 2018-03-29 18:30:05 +02:00
Hiltjo Posthuma bd3f7fd842 st -v: remove years and copyright text 2018-03-29 18:18:30 +02:00
Hiltjo Posthuma f4020b2cc4 fix regression by selecting clipboard text
"restore the old behaviour that the primary doesn't get deleted by a simple
left click"

Patch by Daniel Tameling <tamelingdaniel@gmail.com>, thanks!
2018-03-20 21:25:30 +01:00
Hiltjo Posthuma 5345db3c9b clipcopy: no need to check for free(NULL), set to NULL after free 2018-03-17 13:48:10 +01:00
Quentin Rameau 0b507bb731 Fix title initialization 2018-03-16 16:44:30 +01:00
Quentin Rameau e7ef3c4ce9 Fix regression from 69e32a6 when setting title. 2018-03-16 16:44:30 +01:00
Hiltjo Posthuma c5ba9c025b use math.h for ceilf 2018-03-09 15:36:38 +01:00
Hiltjo Posthuma b81888ee7d xhints: no need to initialize sizeh 2018-03-09 15:36:25 +01:00
Devin J. Pohly 20e0da7f14 General cleanup
Simplifies logic in a couple places and removes a redundant function
call.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly 403c57ebb5 Clean up #includes
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly e0215d5377 Reduce visibility wherever possible
When possible, declare functions/variables static and move struct
definitions out of headers.  In order to allow utf8decode to become
internal, use codepoint for DECSCUSR extension directly.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly 30683c70ab Limit usage of extern to config.h globals
Prefer passing arguments to declaring external global variables.  The
only remaining usage of extern is for config.h variables which are
needed in st.c instead of x.c (where it is now included).

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly a3beb626d2 Remove x.c dependency on term
The xinit function only needs to the rows/cols, so pass those in rather
than accessing term directly.  With a bit of arithmetic, we are able to
avoid the need for term.row and term.col in x2col, y2row, and
xdrawglyphfontspecs as well, completing the removal.

Term is now fully internal to st.c.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly a5dc1b4697 Pull term references out of xdrawcursor
Gradually reducing x.c dependency on Term object.  Old and new cursor
glyph/position are passed to xdrawcursor.  (There may be an opportunity
to refactor further if we can unify "clear old cursor" and "draw new
cursor" functionality.)

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly 88d8293fb4 Move win-agnostic parts of draw/drawregion to st.c
Introduces three functions to encapsulate X-specific behavior:
 * xdrawline: draws a portion of a single line (used by drawregion)
 * xbegindraw: called to prepare for drawing (will be useful for e.g.
   Wayland) and returns true if drawing should happen
 * xfinishdraw: called to finish drawing (used by draw)

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly 05c66cb37d Split mode bits between Term and TermWindow
Moves the mode bits used by x.c from Term to TermWindow, absorbing
UI/input-related mode bits (visible/focused/numlock) along the way.

This is gradually reducing external references to Term.  Since
TermWindow is already internal to x.c, we add xsetmode() to allow st to
modify window bits in accordance with escape sequences.

IS_SET() is redefined accordingly (term.mode in st.c, win.mode in x.c).

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:56:26 -06:00
Devin J. Pohly 33201ac65f Move CRLF input processing into ttywrite
This also allows us to remove the crlf field from the Key struct, since
the only difference it made was converting "\r" to "\r\n" (which is now
done automatically in ttywrite).  In addition, MODE_CRLF is no longer
referenced from x.c.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:53:24 -06:00
Devin J. Pohly 52d6fb1ab1 Move terminal echo logic into st.c
The only thing differentiating ttywrite and ttysend was the potential
for echo; make this a parameter and remove ttysend.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:53:24 -06:00
Devin J. Pohly cfc7acdfd9 Move remaining selection mode logic into selextend
The "done" parameter indicates a change which finalizes the selection
(e.g. a mouse button release as opposed to motion).

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:53:24 -06:00
Devin J. Pohly bcb5d3adbe Move terminal-related selection logic into st.c
The front-end determines information about mouse clicks and motion, and
the terminal handles the actual selection start/extend/dirty logic by
row and column.

While we're in the neighborhood, we'll also rename getbuttoninfo() to
mousesel() which is, at least, less wrong.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:53:24 -06:00
Devin J. Pohly 5683b1f80c Move X-specific selection info into XSelection
Data about PRIMARY/CLIPBOARD and clicks are part of the front-end, not
the terminal.

Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
2018-02-25 21:53:24 -06:00