Moves the mode bits used by x.c from Term to TermWindow, absorbing
UI/input-related mode bits (visible/focused/numlock) along the way.
This is gradually reducing external references to Term. Since
TermWindow is already internal to x.c, we add xsetmode() to allow st to
modify window bits in accordance with escape sequences.
IS_SET() is redefined accordingly (term.mode in st.c, win.mode in x.c).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This also allows us to remove the crlf field from the Key struct, since
the only difference it made was converting "\r" to "\r\n" (which is now
done automatically in ttywrite). In addition, MODE_CRLF is no longer
referenced from x.c.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The only thing differentiating ttywrite and ttysend was the potential
for echo; make this a parameter and remove ttysend.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The "done" parameter indicates a change which finalizes the selection
(e.g. a mouse button release as opposed to motion).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The front-end determines information about mouse clicks and motion, and
the terminal handles the actual selection start/extend/dirty logic by
row and column.
While we're in the neighborhood, we'll also rename getbuttoninfo() to
mousesel() which is, at least, less wrong.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This removes ttynew's dependency on cresize being called first, and then
allows us to absorb the ttyresize call into cresize (which always
precedes it).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
None of the X-related includes are needed any longer. In addition, move
the X modifier defines into x.c, as they are not used outside.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This is an X type and should be internal to x.c.
The selcopy() function was a single line and only used in one place, so
it was inlined to reduce LOC.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
There was only a single reference to the `win` variable in st.c, so
exporting that to x.c allows us to rid ourselves of another extern.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
config.h includes references to KeySyms and other X stuff. Until we
come up with a cleaner way to separate configuration, it is simpler
(leads to more code removal) to have this here.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The echo-to-terminal portions of ttyread and ttysend were actually doing
the same thing. New function twrite() now handles this. The parameter
show_ctrl determines whether control characters are shown as "^A". This
was the only difference between tputc and techo, and techo is now unused
and removed.
(This commit should not change st's behaviour.)
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This commit is purely about reducing externs and LOC. If the main and
run functions ever move elsewhere (which will probably make sense
eventually), these should come along with them.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Modifiers and keysyms are specific to X, and the functions match and
kmap are only used in x.c. Needed to global-ize the key arrays and
lengths from config.h (for now).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This makes x(un)loadfonts internal to x.c. Needed to reorder includes
and move a typedef to keep the compiler happy.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This makes xsetenv internal to x.c, and allows iso14755's external
command to use $WINDOWID instead of having to snprintf it again. (The
same benefit will apply to the externalpipe patch.) The xwinid function
is no longer needed.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Non-printable characters, such as line breaks, in a base64 encoded
string violate the "string length must be a multiple of four" rule.
This patch pads the result buffer by one extra unit of four bytes,
and skips over non-printable characters found in the input string.
XftFontMatch does display-specific font configuration (commit 528241a).
Nice. Unfortunately, when we switched from FcFontMatch, we also stopped
storing the post-Fc{Config,Default}Substitute FcPattern for future
lookups. The result is that if a glyph isn't found in the primary font,
secondary font lookups use the original FcPattern, not the configured
one. If you have custom fontconfig rules (like me), this can be
disappointing.
I basically just copied the guts out of XftFontMatch[1] and saved
the intermediate configured FcPattern. Could be related to the bug that
inspired commit 4242027.
[1]: https://cgit.freedesktop.org/xorg/lib/libXft/tree/src/xftfont.c
Hi,
When I specify a font by point size (I'm using "Inconsolata:size=12"),
characters that are substituted from another font because they are not in the
main one appear too small. Doing a zoom reset fixes it. For example:
Before: http://i.imgur.com/G4Mfv4X.png
After: http://i.imgur.com/PMDhfQA.png
I found that adding the pixel size (acquired from the initial font load) to the
pattern then reloading the font fixes the problem. I'm not sure if this is a
proper fix, though.
The two functions strdump(), csidump() are called to show errors and
their output is introduced by a message printed to stderr. Thus, it it
more consistent to have them print to stderr.
Moreover stderr is unbuffered (at least on Linux), making problems
immediately visible.
These sequences are used to operate with sixels, but they are still
str sequences, so they are finished with \a, ST or with a C1 control
code. This patch also disables utf8 handling for the case of sixels.
There are some ocasions where we want to disable the enconding/decoding of utf8, mainly
because it adds an important overhead. This is partial patch for ESC % G and ESC % @,
where they modified the way that st reads and write from/to the serial line, but it does
not modifies how it interacts with the X window part.
https://tronche.com/gui/x/icccm/sec-2.html#s-2.4 specifies:
> Once all the data in the selection has been retrieved,
> the requestor should delete the property in the SelectionNotify request
Most Clipboard-Owners ignore whether or not the property is already set,
so this is mostly a cosmetic change to keep the windows property list clean.
However, at least synergy decides to wait for the requestor to delete
the properties if they are already set by a previous paste (from synergy).
Signed-off-by: Christoph Lohmann <20h@r-36.net>
LEN(str) is one larger than strlen(str) because it also counts the zero
terminator. The original code would include the .notdef glyph (since it'll
try to encode character 0, which gets encoded to the .notdef glyph) when
measuring the average dimensions of printable ascii characters.
This causes problems with fonts like GNU Unifont where the .notdef glyph is
not the same width as the usual half-width characters.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
The y-position of a character found by asking fontconfig for a matching
font does not take the border pixels into account, resulting in a
slightly misaligned vertical position.
Signed-off-by: Ton van den Heuvel <tonvandenheuvel@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
This fix is needed to use dual-width fonts, which have double-width
glyphs (e.g. CJK unified ideographs).
Signed-off-by: Ryusei Yamaguchi <mandel59@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
Scratch the preceding patch, this one is more correct
(don't forget to 'git am --scissors' ;))
-- >8 --
Also reformat the strings in a saner layout
Signed-off-by: Christoph Lohmann <20h@r-36.net>
This way we can call cresize() to set the terminal size before creating
a tty or spawning a process, which will start with the correct size.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
ttywrite was assuming that if it could not write then it could
read, but this is not necessarily true, there are some situations
where you cannot read or write. The correct behaviour is to detect
if you can read or/and write.
If we want to show a custom selected cursor color, we must not set the
revert attribute to the drawn glyph.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
Before the fix the cursor wouldn't obey if it's in a selection. If it is
inside it will now change to the reverse. This patch also adds that the
defaultcs will be reversed for the manually drawn cursors.
Before this patch, when pasting over BUFSIZE (8192 bytes here), st would
do the following:
\e[200~...8192 bytes...\e[201~\e[200~...remaining bytes...\e[201~
With this patch, the start marker is only sent when the offset is 0 (at
the beginning of selnotify) and the end marker is only sent when the
remaining bytes to read are 0 (at the end).
For short pastes, both conditions are true in the same iteration.
For long pastes, it removes the extra markers in the middle, keeping the
intended wrapping:
\e[200~...8192 bytes......remaining bytes...\e[201~
Signed-off-by: Christoph Lohmann <20h@r-36.net>
gcc would warn about an unused result. We know it is 0 and dup()
can't fail in these circumstances, as we closed fd0 previously.
Using dup2() to do the same saves one line and shuts gcc up, bringing
us a clean build back.
When a line has no any character linelen is 0, so last = &term.line[y][MIN(lastx, linelen-1)]
generated a pointer to the end of the previous line. The best thing we can do in this case
is to add a newline, because we don't have a glyph to print (and consult its state of
wrapping).
wcwidth() returns -1 for all the non visible characters, but it doesn't
necessarilly mean that they are incorrect. It only means that they are not
printable.
A little fix in xwrite().
>From 3727d2e3344b57128ab51c7839795204f1f839ff Mon Sep 17 00:00:00 2001
From: Quentin Rameau <quinq@fifth.space>
Date: Fri, 24 Jul 2015 11:40:46 +0200
Subject: [PATCH] Fix type for write(2) return variable.
The allocated lengh of s fits into an integer so we can safely use
ssize_t here.
This practice proved itself in sbase, ubase and a couple of other
projects.
Also remove the True and False defined in X11 and FcTrue and FcFalse
defined in Fontconfig.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
Any system having different assignments than the usual 0, 1, 2 for
the standard file numbers and 0, 1 for the exit-statuses is broken
beyond repair.
Let's keep it simple and just use the numbers, no reason to fall
out of the window here and bend down for POSIX.
In one occasion, the ret-variable was not necessary. The check was
rewritten.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
For a higher usefulness of the utf8strchr function, the index of the
UTF-8 character could be returned in addition with a Rune instead of a
char*. Since utf8strchr is currently only used by ISDELIM I didn't
bother to increase the complexity.
Devin J. Pohly
Suraj N. Kurapati
Quentin Rameau
Alexander Krotov
osandov@osandov.com
Michael Forney
fpqc
Roberto E. Vargas Caballero
Spencer Phippen
ian@remmler.org
pl@ninthfloor.org
Roberto E. Vargas Caballero
Christoph Lohmann
v4hn
Tor Andersson
Ton van den Heuvel
Ryusei Yamaguchi
Ivan Tham
Jason Woofenden
dequis
FRIGN
Jan Christoph Ebersbach
Alex Kozadaev
Quentin Rameau
Weng Xuetian
Quentin Rameau
